Modulinks 3X+1 EXTENSION SOCKET
(PL3BST+1BS)
Product Specifications
• Rated Voltage: 240V AC 50Hz
• Rated Current: 13A (protected by 13A 250V AC fuse)
• Power Cord Length: 2M with approved BS plug-top
• Power Surge Protection: L-N, L-E, N-E
• Max. Surge Current: Total 19,500A
• Max. Spike Voltage: 6kV
• DC Clamping Voltage: 710V
• Response Time: <1ns
• RFI/EMI Noise Filter: >40dB at 30MHz
Features
• Compatible with all ModuLinks sockets
• Add on ModuLinks sockets as you require
• Compact and stylish
• Insert 2-pin plugs directly, without hassle
• 1 to 1 Exchange (Product Replacement Warranty)
• Max. RM10,000 Connected Equipment Warranty
• Lifetime Warranty
Instructions
• Total amperage of connected equipment must not exceed 13A.
• Power LED on ModuLinks 3x+1 source unit lights up when all ModuLinks Sockets are properly connected.
• For safety, if the last ModuLinks Socket is not connected, all ModuLinks Sockets will not energise.
• Do not use ModuLinks 3x+1 near hot, wet or oily locations.
• Do not plug extension cords into ModuLinks 3x+1.
• Unplug ModuLinks 3x+1 from power outlet when not in use.
Cautions
• ModuLinks 3x+1 is for indoor use only.
• Do not place cable through doorways or at locations that might damage cable insulation.
• Do not install product during a lightning storm.
• In case of any emergency, immediately unplug product from power outlet.
• Do not use product for other than its intended purposes.
• Warranty does not cover damage due to breakage, voltage overload or other forms of misuse.