PL100B4-SW
Product Specifications
Max. Surge Current
Total 19,500 A
Max. Spike Voltage
6kV
DC Clamping Voltage
710 V
Response Time
40dB at 30 MHz
Instructions
- Total comperage of connected equipment must not exceed 13A.
- LED on first Modulinks Socket lights up when all Modulinks Sockets are properly connected.
- For safety, if the last Modulinks Socket is not connected, all Modulinks Sockets will not energise.
- Do not use Modulinks Sockets near hot, wet or oily locations.
- Do not plug extension cords into Modulinks Sockets.
- Unplug product from power outlet when not in use.
Cautions
- Modulinks Sockets are for indoor use only.
- Do not place cable through doorways or at locations that might damage cable insulation.
- Do not install product during a lightning storm.
- In case of any emergency, immediately unplug product from power outlet.
- Do not use product for other than its intended purposes.
- Warranty does not cover damage due to breakage, voltage overload or other forms of misuse.
