PL3BST+1BS
Product Specifications
Rated Voltage
240V AC 50Hz
Rated Current
13A (protected by 13A 250V AC fuse)
Power Cord Length
2M with approved BS plug-top
Power Surge Protection
L-N, L-E, N-E
Max. Surge Current
Total 19,500A
Max. Spike Voltage
6kV
DC Clamping Voltage
710V
Response Time
<1ns
RFI/EMI Noise Filter
>40dB at 30MHz
Features
- Compatible with all ModuLinks sockets
- Add on ModuLinks sockets as you require
- Compact and stylish
- Insert 2-pin plugs directly, without hassle
- 1 to 1 Exchange (Product Replacement Warranty)
- Max. RM10,000 Connected Equipment Warranty
- Lifetime Warranty
Instructions
- Total amperage of connected equipment must not exceed 13A.
- Power LED on ModuLinks 3x+1 source unit lights up when all ModuLinks Sockets are properly connected.
- For safety, if the last ModuLinks Socket is not connected, all ModuLinks Sockets will not energise.
- Do not use ModuLinks 3x+1 near hot, wet or oily locations.
- Do not plug extension cords into ModuLinks 3x+1.
- Unplug ModuLinks 3x+1 from power outlet when not in use.
Cautions
- ModuLinks 3x+1 is for indoor use only.
- Do not place cable through doorways or at locations that might damage cable insulation.
- Do not install product during a lightning storm.
- In case of any emergency, immediately unplug product from power outlet.
- Do not use product for other than its intended purposes.
- Warranty does not cover damage due to breakage, voltage overload or other forms of misuse.